Table of Contents
Advertisement
64
BDL5531EL LCD
1.2 Product Range
Display
BDL5531EL/00
BDL5531EL/00
2. ELECTRICAL REQUIREMENTS
All performance specifications are defined under "STANDARD TESTING CONDITIONS", unless
otherwise specified.
2.1
Standard Testing Conditions
Warm up time -
Ambient temperature -
Ambient light -
Relative humidity -
Barometric pressure -
Dark room conditions -
2.2
Video / Audio Input Signals
2.2.1
PC input signal requirements
Pixel rate capability -
VGA sync input -
HDMI input -
VGA analog RGB level - 0 ~ 700mV linear, positive polarity, terminated with 75
I²C DDC signal - DDC2B required, DDC serial Data & Clock, DDC components are
Preset timings - 26 preset modes sets, 15 factory preset mode sets, timing, size and centering
General Product Specification
Destination
EU
US
30 min.
15 C ~35 C.
400-600 lux
25% ~ 75%.
860 mbar ~ 1013 mbar.
< 1 lux for optical measurements
86 MHz.
TTL level, separate H/V sync only, "+" or "-" polarity,
TMDS channel:
DDC channel:
impedance.
connected to both display Vcc and DDC +5V (from PC via video cable),
that the PC can read the DDC data also when the display is powered off.
To prevent current feedback into PC, blocking diodes are required at
display side.
have been pre-aligned in factory according to specifications.
Mains Cord
EU, UK
NA
terminated with
Carries video data.
Signaling method: According to DVI 1.0 specification.
Single-link (Type A HDMI).
Video pixel rate: 25 MHz to 165 MHz (Type A)
Allows source to interrogate capabilities of sink.
I²C signaling with 100 kHz clock.
E-EDID data structure according to EIA/CEA-861B
and VESA Enhanced EDID.
Cabinet Color
Generic Black
Generic Black
2.2k
impedance.
Advertisement
Table of Contents
