Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Philips BDL5556ET
Summary of Contents for Philips BDL5556ET
- Page 1 BDL5556ET V1.00 www.philips.com/welcome User Manual (English)
- Page 2 • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
- Page 3 BDL5556ET Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
- Page 4 BDL5556ET Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 5 BDL5556ET Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
- Page 6 BDL5556ET Information for U.K. only WARNING – THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse.
- Page 7 BDL5556ET China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量。 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr 6+) (PBB) (PBDE) 外壳 液晶面板 电路板组件 附件 (遥控器， 电源线， 连接线) 遥控器电池 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求. 環保使用期限 此標識指期限(十年)，電子信息產品中含有的有毒有害物質或元素在正常使用的條件下不會發生外泄或突變...
- Page 8 BDL5556ET North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.
- Page 9 BDL5556ET Restriction on Hazardous Substances statement (India) This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
-
Page 10: Table Of Contents
BDL5556ET Table Of Contents Unpacking and Installation ........1 OSD Menu ..............15 1.1. Unpacking ..............1 4.1. Navigating the OSD Menu ......15 1.2. Package Contents .............1 4.1.1. Navigating the OSD menu using the remote control........15 1.3. Installation Notes ............1 4.1.2. Navigating the OSD menu using the 1.4. -
Page 11: Unpacking And Installation
BDL5556ET Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. -
Page 12: Mounting On A Wall
BDL5556ET 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with UL1678 standard in North America. Protective Sheet Unit：mm... -
Page 13: Mounting In Portrait Position
BDL5556ET 1.5. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. -
Page 14: Parts And Functions
BDL5556ET Parts and Functions 2.1. Control Panel MUTE INPUT MUTE INPUT MUTE INPUT MUTE INPUT MENU MENU MENU MENU and [ ] buttons and hold down continuously for more than [POWER] button 3 (three) seconds. Press to turn the display on or put the display to standby. -
Page 15: Input/Output Terminals
BDL5556ET 2.2. Input/Output Terminals 5 6 7 9 10 11 12 14 15 AC IN VGA IN (D-Sub) AC power input. VGA video input. MAIN POWER SWITCH VGA AUDIO IN Main power on/off switch. Audio input for VGA source (3.5 mm stereo phone). -
Page 16: Remote Control
BDL5556ET 2.3. Remote Control [DISPLAY] button Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions [ ] button • Press to move the selection left in OSD menu. POWER • Press to decrease the value in OSD menu. -
Page 17: Handling The Remote Control
BDL5556ET 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. -
Page 18: Connecting External Equipment
BDL5556ET Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out COMPONENT Out (YPbPr) (YPbPr) DVD / VCR / VCD [AUDIO IN] [AUDIO IN] [AUDIO IN] [COMPONENT IN] (Pr/Pb/Y) 3.1.2. Using HDMI video input... -
Page 19: Connecting A Pc
BDL5556ET 3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin Audio Out [AUDIO IN] [VGA IN] [VGA AUDIO IN] 3.2.2. Using DVI input DVI Out Audio Out [AUDIO IN] [DVI IN] [VGA AUDIO IN]... -
Page 20: Using Hdmi Input
BDL5556ET 3.2.3. Using HDMI input HDMI Out [HDMI IN] 3.3. Connecting Audio Equipment 3.3.1. Connecting external speakers External speakers 3.3.2. Connecting an external audio device Audio In [AUDIO OUT] [AUDIO OUT] [AUDIO OUT]... -
Page 21: Connecting Multiple Displays In A Daisy-Chain Configuration
BDL5556ET 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: M aximum 150 displays (15x10) can be used in a daisy-chain conguration. 3.4.1. Display control connection Connect the [RS232C OUT] connector of DISPLAY 1 to the [RS232C IN] connector of DISPLAY 2. [RS-232C IN] [RS-232C IN] [RS-232C IN] [RS-232C IN] 3.4.2. -
Page 22: Fixing Your External Pc
BDL5556ET 3.5. Fixing your external PC This display reserved 6 pcs of M4 screw holes with 100 mm pitch for mounting your Smart Insert Module. (by using M4x10 screw) 100 mm... -
Page 23: Touch Operation
BDL5556ET 3.6. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and supports Touch the target on the screen with two fingertips holded together and the Windows Touch features either by singletouch or multitouch move them apart to zoom in (magnify) the screen image. operation. You can touch the pictures or words on the display gently with your fingers, and your computer will react. - Page 24 BDL5556ET The Touch screen does not require a device driver be installed on the host computer for all modes of operation. For Windows 7 and Windows 8, it is recommended that the standard Microsoft Window Control Panel calibration is used. Item Description Operating Systems Suppor ted by • Windows 8 Plug-and-Play • Windows 7 (64 bit &...
-
Page 25: Osd Menu
BDL5556ET OSD Menu 4.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) structure is shown 4.2.1. Picture menu below. You can use it as a reference for further adjusting your display. 4.1. Navigating the OSD Menu Brightness... -
Page 26: Screen Menu
BDL5556ET This item is functional only when {Color temperature} is set This item is functional for VGA input only. NOTE: NOTE: to {User 1}. Clock phase {User 2} ： Adjust the {Color temperature} by 100K per Adjust to improve the focus, clarity and stability of the image. -
Page 27: Audio Menu
BDL5556ET V zoom Expands the vertical size of the image only. H position Moves the horizontal position of the image left or right. V position Audio reset Moves the vertical position of the image up or Reset all settings in the Audio menu to factory preset values. -
Page 28: Configuration1 Menu
BDL5556ET • {RGB} – Select {On} to let the display enter APM mode when no Main Picture Card Displayport HDMI DVI-D YPbPr Video signal is detected from the HDMI Graphic mode, HDMI, DVI-D, or Sub Picture VGA inputs after three successive cycles. Displayport HDMI • {VIDEO} – Select {On} to enter power saving mode when no signal... -
Page 29: Configuration2 Menu
BDL5556ET OSD turn off Network settings Set the period of time the OSD (on-screen display) menu stays on the screen. The options are: {5 ~ 120} seconds. Information OSD Network host name DHCP Disable Set the period of time the information OSD is displayed on the upper right corner of the screen. -
Page 30: Advanced Option Menu
BDL5556ET 4.2.7. Advanced option menu • {Interlace} – Disable the IP function. This mode is suitable for displaying motion pictures, but it increases the chance of image retention. Input resolution Picture Film mode HDMI clock threshold Screen Black level expansion Choose to turn on or off the film mode frame conversion function. - Page 31 BDL5556ET Example: 2 x 2 screen matrix (4 displays) H monitors = 2 displays V monitors = 2 displays H monitors Position • Enable: Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in {H monitors}, {V monitors}, {Position}, and {Frame comp.}.
- Page 32 BDL5556ET Monitor ID NOTE: We recommend you to set up current date and time in the {Date and time} menu before using this function. Set the ID number for controlling the display via the RS232C 1. Press [SET] or [ ] button to enter the submenu.
- Page 33 BDL5556ET OPS settings the display upright as the monitor is moved between its portrait and landscape positions. Set the OPS configuration under each power condition. The following DDC/CI commands should be supported via command • {Auto} – After selecting {Card OPS} for video source input, the line: OPS will be set to off when the display power is set to off, or set to on when the display power is set to on.
-
Page 34: Input Mode
BDL5556ET Input Mode PC Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz WVGA 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array... -
Page 35: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. -
Page 36: Dark Dot Defects
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table. -
Page 37: Cleaning And Troubleshooting
BDL5556ET Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. -
Page 38: Troubleshooting
BDL5556ET 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on. display is not switched on. -
Page 39: Technical Specifications
BDL5556ET Technical Specifications Display: Item Specifications Screen Size (Active Area) 54,6” (138.7 cm) LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.630 (H) x 0.630 (V) [mm] Displayable colors 10bits, 1.06 Billion colors Brightness 450 cd/m²... - Page 40 BDL5556ET Weight (without stand) 43.0 Kg Gross Weight 52.1 Kg Environmental Condition: Item Specifications Operational 0 ~ 40°C Temperature Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Humidity Storage 10 ~ 90% RH (No condensation) Operational 0 ~ 3,000 m...
- Page 41 © 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.