Minimum Mantel Clearances - Napoleon BGD40-N Installation And Operating Instructions Manual

27
7.4

MINIMUM MANTEL CLEARANCES

WARNING
!
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
CLEARLY MAINTAINED.
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
73.1
Combustible mantel clear-
ance can vary according
to the mantel depth. Use
the graph to help evaluate
11" MANTEL
the clearance needed. The
7" MANTEL
three-sided top extension
11"
piece may be removed if
7"
non-combustible framing is
TOP OF
faced with a non-combusti-
APPLIANCE
ble material.
Dashed lines are suitable mantel sizes and clearances
f i r e - p a r t s . c o m
when a non-combustible facing is used. 32 1/2"
W415-0811 / D / 08.16.12