Topcom SOLOGIC B901 COMBO User Manual page 25

4.17 Making an internal call to a handset and forwarding a
call to the cordless handset
You can forward a call from the base station to the handset or talk to
the external subscriber and a second subscriber on the cordless
handset at the same time (conference call).
4 5 6
G J M
K
H N
I L O
4.18 Finding the handset (paging function)
You can use this function to locate your handset.
4.19 The key (Flash)
R
Press the Flash key on the base station (key 22 in figure 3F on page
12) to use special services on your external line such as "call waiting"
(providing your telephone line provider offers this service) or to forward
a call when you are using a PBX. The flash key R briefly interrupts your
call. You can set this interruption time to 100 ms or 300 ms. However,
if your system requires a longer flash time, you can change this.
OK
OK
OK
OK
1 Hold down the INT key
hear an audio signal, then release the key. "INT"
appears in the display.
2 Enter the number of the handset. Once the call has
been set up with the handset, you can talk
internally.
3 Put the receiver down to transfer the call to the
cordless handset.
OR
4 Hold down the INT key
conference call.
1 Press the paging key on the base station.
The handset will ring for 30 seconds and the red
LED on the handset will flash.
2 Press any key on the handset to stop it ringing.
Press the Menu / OK key.
1
2 Select "SETTINGS" and confirm.
3 Select "RECALL" and confirm.
4 Now select "LONG" or "SHORT" and confirm.
Operating the telephone
for 3 seconds until you
28
for 3 seconds to set up a
28
23