Topcom SOLOGIC B901 COMBO User Manual page 22

Operating the telephone
OK
4.12 Setting the ring tone volume
OK
OK
OK
OK
4.13 Setting the dialling mode
There are two dialling modes for telephone connections:
- DTMF / tone dialling (most common)
- Pulse dialling mode (only necessary if this devices is operated on an
older PBX!)
OK
OK
OK
OK
4.14 Setting the system PIN
Some functions are only available if you know the PIN code for the
base station.
The PIN code is 4 characters long. The default PIN code is "0000".
Proceed as follows to change the PIN code and set your own PIN:
OK
OK
OK
OK
4 5 6
G J M
H K N
L
I O
OK
4 5 6
G J M
K
H N
I L O
4.15 Resetting the base station
You can reset all the settings on the base station and delete all entries
in the phone book, calls list, VIP list and redial list.
20
3 Select "INTERNAL" for internal calls.
OR
Select "EXTERNAL" for incoming external calls.
4
5 Now select a ring tone (1 to 9) and confirm.
1 Press the Menu / OK key.
2 Select "RING TONE" and confirm.
3 Select "VOLUME" and confirm.
Select the required volume (Off, 1-5) and confirm.
4
1 Press the Menu / OK key.
2 Select "SETTINGS" and confirm.
3 Select "DIAL MODE" and confirm.
4 Select "TONE" or "PULSE" and confirm.
1 Press the Menu / OK key.
Select "SETTINGS" and confirm.
2
3 Select "SYSTEM PIN" and confirm.
Enter the "OLD PIN" and press OK.
4
5 Enter the "NEW PIN" and confirm.