Product Specifications - Gigabyte GA-X99P-SLI User Manual

Table of Contents

Advertisement

1-2 Product Specifications
CPU
Support for Intel
Š
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU
Š
Chipset
Intel
Š
Memory
8 x DDR4 DIMM sockets supporting up to 128 GB of system memory
Š
4 channel memory architecture
Š
Support for DDR4 2133 MHz memory modules
Š
Support for non-ECC memory modules
Š
Support for Extreme Memory Profile (XMP) memory modules
Š
Support for RDIMM 1Rx8/2Rx8/1Rx4/2Rx4 memory modules (operate in non-
Š
ECC mode)
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Graphics
Intel
Š
-
Audio
Realtek
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
Support for S/PDIF Out
Š
LAN
Intel
Š
Expansion Slots Š
2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2)
2 x PCI Express x16 slots, running at x8 (PCIE_3/PCIE_4)
Š
(All of the PCI Express x16 slots conform to PCI Express 3.0 standard.)
2 x PCI Express x1 slots
Š
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
Multi-Graphics
Support for NVIDIA
Š
technologies
Technology
Support for AMD Quad-GPU CrossFireX
Š
CrossFire
Storage Interface Š
Chipset:
-
-
-
-
Hardware Installation
Core
i7 processors in the LGA2011-3 package
®
X99 Express Chipset
®
* D ue to a Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than the size of
the physical memory installed.
Thunderbolt
3 Controller:
®
1 x Intel
Thunderbolt
3 connector, supporting DisplayPort and Thunderbolt
®
video outputs and a maximum resolution of 4096x2304@60 Hz
* B ecause of the limited I/O resources of the PC architecture, the number of
Thunderbolt
devices that can be used is dependent on the number of the PCI
Express devices being installed. (Refer to Chapter 1-7, "Back Panel Connectors,"
for more information.)
* Support for DisplayPort 1.2 version.
ALC1150 codec
®
GbE LAN chip (10/100/1000 Mbit)
®
* F or optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics
cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
* T he PCIE_4 slot shares bandwidth with the PCIE_1 slot and the PCIE_3 slot shares
bandwidth with the PCIE_2 slot. When the PCIE_4/PCIE_3 slot is populated, the
PCIE_1/PCIE_2 slot will operate at up to x8 mode.
* W hen an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode
Quad-GPU SLI
®
technologies
* T he 4-Way NVIDIA
SLI
configuration is not supported when an i7-5820K CPU is
®
installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire
NVIDIA
SLI
Configuration."
®
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2/x1
SSD support)
1 x SATA Express connector
6 x SATA 6Gb/s connectors (SATA3 0~5)
SATA connectors support for RAID 0, RAID 1, RAID 5, and RAID 10
- 10 -
and 4-Way/3-Way/2-Way NVIDIA
and 4-Way/3-Way/2-Way AMD
SLI
®
/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents