Gigabyte GA-X99P-SLI User Manual page 11

Storage Interface Š Chipset:
- 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes
only
(An operating system installed on the SATA3 0~5 ports cannot be used on the
sSATA 0~3 ports.)
USB Chipset+Intel
Š
- 1 x USB Type-C
- 1 x USB 3.1 Type-A port (red) on the back panel
Chipset+Renesas
Š
- 3 x USB 3.0/2.0 ports on the back panel
Chipset:
Š
- 4 x USB 3.0/2.0 ports (available through the internal USB headers)
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors
Š
1 x PCIe power connector
Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
10 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
1 x water cooling fan header (CPU_OPT)
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
2 x USB 3.0/2.0 headers
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module (TPM) header
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x DisplayPort In port
Connectors
Š
1 x USB Type-C
Š
1 x USB 3.1 Type-A port (red)
Š
3 x USB 3.0/2.0 ports
Š
4 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
1 x optical S/PDIF Out connector
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Š
Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
®
Š
Hardware System voltage detection
Š
CPU/System/Chipset temperature detection
Monitor
Š
CPU/CPU OPT/System fan speed detection
Š
CPU/System/Chipset overheating warning
Š
CPU/CPU OPT/System fan fail warning
Š
CPU/CPU OPT/System fan speed control
Š
* Whether the fan speed control function is supported will depend on the cooler you
Thunderbolt 3 Controller:
® ™
port on the back panel, with USB 3.1 support
™
USB 3.0 Hub:
®
port, with USB 3.1 support
™
install.
- 11 - Hardware Installation