Table of Contents
Advertisement
S
g
This key is used to enter the System select mode.
o
This key is used to enter the Group select mode.
O
This key function is used to toggle a PC programmable fea-
ture On and Off.
DEL
Secondary function - used to delete a digit during numeric
m
entry (see SELECTION MODE RULES).
Primary function - accesses the menu list. This is a list of
additional features that are not available directly from the
keypad. See MENU for details.
SELECT
Secondary function - activates a selected item within a list.
After the menus list is accessed, select a menu item from the
list via RAMP control
key. Once activated, MENU continues its secondary func-
tion for activating a selected parameter setting until the radio
returns to its normal receive state. This is similar to an enter
s
key.
The Status key permits the transmission of a pre-pro-
n
grammed status message to an EDACS site.
The Message key permits the transmission of a pre-pro-
c
grammed message to an EDACS site.
C
Serves several purposes depending on the operating mode.
In trunked mode, the CLR button exits the current operation
and removes all displays associated with it. The radio and
display then return to the group receive state. In Conven-
tional mode, pressing this button unmutes the receiver so ac-
tivity on the selected channel can be monitored. When
pressed and held for approximately 3 seconds, this button
toggles conventional channel decoding (Channel Guard,
Digital Channel Guard, T99) on and off if programmed for
p
the selected channel.
Used to place telephone calls through the radio by selecting
the interconnect special call function. See Telephone Inter-
d
connect Calls for details.
Used to adjust the current display intensity and the keypad
i
backlight level.
Used to call individual or make an all-call by selecting the
E
individual call function. See Individual Calls for details.
This key function is used to declare emergencies.
,
.
or
and activate it with this
13
Advertisement
Table of Contents
