If your vehicle does not have DIC steering wheel
buttons, you will not have all of the features listed.
Scroll through the odometer and trip odometer by
pressing the trip odometer reset stem located on the
instrument panel cluster. Turn off, or acknowledge, DIC
messages by pressing the trip odometer reset stem.
See Speedometer and Odometer on page 3-32 for
information on features for vehicles without DIC buttons.
3
(Trip Information): Press this button to
display the odometer, trip odometers, tire pressure for
vehicles with a Tire Pressure Monitor (TPM) system,
and timer.
t
(Fuel Information): Press this button to display
the current range, fuel used, average fuel economy,
and engine oil life.
4
(Customization): Press this button to access the
vehicle settings menu and customize the personal
settings on your vehicle.
r
(Select): Press this button to reset certain
DIC functions and set your customization settings.
Pressing any of the DIC buttons will acknowledge
DIC messages and clear them from the DIC display.
DIC Operation and Displays
The DIC comes on when the ignition is on. After a short
delay the DIC will display the information that was
last displayed before the engine was turned off.
If a problem is detected, a warning message will appear
on the display. Pressing the trip stem will acknowledge
any warning or service messages. Pressing any of
the DIC steering wheel buttons — trip information, fuel
information, customization, or select button — will
also acknowledge any warnings or service messages.
3-51