Maintenance - Tunturi Classic RUN 1.0 Owner's Manual

OPERATION
1. Insert the Safety key.
2. Press the power button. The monitor will turn on. The
program window will display ENTER WEIGHT. Press the
SPEED +/- or INCLINE +/- buttons to input your weight.
3. Press ENTER to confirm your setting value. The program
window will display SELECT PROGRAM OR PRESS START.
4. Press SELECT button to select the desired program
P1-P17 or U1-U2 with the SPEED +/- or INCLINE +/- buttons.
PROGRAMS 1 – 17
Editing the profile levels
1. In the program window, the first column of LED matrix
will flash. Press SPEED + / - to set up desired speed value
and press incline + / - to set up desired incline level.
2. Press the enter button to confirm your profile setting for
first column.
3. Continue to finish all of the profile setting column by
column.

MAINTENANCE

The equipment is safe to use only when periodically
maintained and inspected for faults and wear.
CAUTION! Do not attempt any servicing or
adjustment other than those described in this manual. Any
other servicing must be performed by an authorized
service representative. Check the tightness of all fixing
screws once a year. Do not overtighten.
CLEANING AND LUBRICATING THE TREADMILL
Failure to lubricate your treadmill may invalidate the
product's warranty!
Wipe the treadmill surfaces, especially the handlebars
and console from dust with a damp cloth or towel. Do
not use solvents. Use a small vacuum nozzle to carefully
vacuum around all visible components (belt, running
deck, side rails etc.). Also keep the area near the treadmill
clean. While in use, the treadmill gathers dust that may
cause problems in the operation of the equipment.
In average domestic use (a maximum of 60 minutes a
day), you should check the lubrication once a month
– however, lubricate the belt only if needed. In more
6