Panasonic Sectlon 770 Technical Manual page 30

Section 770 Voice Recognition Telephone
SYSTEM
RESET TRAIN
WORD TO TRAIN ?
GO BACK
TRAIN GO BACK
NO YES
ADAPTING
GO BACK
30
5. Say "System."
Voice Guidance responds with "Reset or Train?"
6. Say "Train."
Voice Guidance responds with "Retrain which word?"
7. Say the command you want to train.
COMMANDS:
Cancel
Go Back
Number
Complete
Train
Voice Guidance responds with '"
Note: You cannot use the following spoken commands: "Go Back,"
"Cancel," or "Repeat." Press the Soft Key [EXEC] or Cancel Key.
Example: To train "Complete"
Say "Complete."
'"Complete" Right?".
8. If the control command reiterated by Voice Guidance is correct,
say "Yes". If not, say "No".
• "Yes"
Voice Guidance responds with 'Say "
Example: "Yes"
#1
"Complete"?'
• "No"
Voice Guidance speaks the next control command. After
speaking all the control commands, Voice Guidance says "No
other choices." Press the "Go Back" Soft Key [EXEC] to go
back to step 6 and repeat the process.
9. Again say the control command to be retrained.
Voice Guidance responds with "Say it again".
(USA) issued April 2000
Chapter 5. Tuning the Commands to Your Voice
Call Program
Yes No
Delete Name
Add System
Reset Repeat
" Right?'
mm
Voice Guidance responds with
Voice Guidance responds with 'Say
Change
List
Back Space
Delete All
"?'
mm
DBS/824-770