Playing Audio Via Aux In - iHome iBT12 Instruction Manual

Playing Audio via Aux In

1. Connect one end of the included 3.5mm stereo
audio cable to the Aux-in jack on the bottom of the
unit under the splash seal and connect the other end
to the headphone or line-out jack on your audio
device.
2. Press the Power Button on the unit to turn it on.
3. Power on the audio device and use the controls on
the device to play or pause audio, and navigate
tracks.
4. Turn the Volume Knob to adjust the system volume.
You can also adjust volume on your device.
5. When done listening, press the
unit OFF. Remember to turn off your device, too.
NOTE: Make sure no Bluetooth device is playing or
you will not hear the Aux-in audio.
Button to turn the
Mobile Phone
8
iBT12
Using the
aux-in
power
in
Reset
PC/Tablet
Game Devices iPod Laptop MP3/MP4