Pairing Your Device - iHome iBT12 Instruction Manual

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT12. Once your device is
paired, the iBT12 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device and the iBT12 are fully charged. Turn on your
2. Press the
3. Press and hold the
4. "iHome SoundFlask" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected"
or similar message appears, select "iHome SoundFlask" to connect it. If prompted for a passcode, enter
"1234" on your device's keypad.
iHome Sound ..
For iPhone
5. If pairing is successful, a long beep will sound and the Bluetooth status indicator light will appear solid
blue, indicating the iBT12 is ready to play music. There should also be an indication on your device. If
no device is successfully paired within 3 minutes the iBT12 will default to previous mode. Once the iBT12
is paired to a device, it will attempt to autolink when the device is within range (about 30 feet).
Bluetooth device and make it "discoverable" by turning on Bluetooth mode (check in
Options or Settings).
Power Button to turn on the iBT12.
beep and the Bluetooth status indicator light will flash blue quickly.
iHome SoundFlask
Play/Pause/Pairing Button for 2 seconds. The iBT12 will
iHome SoundFlask
For other
5
iBT12
Using the
iHome SoundFlask