Pride Icon Owner's Manual page 27

V . B A T T E R I E S A N D C H A R G I N G
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance in your scooter. Do not use wet-cell batteries, which
have removable caps. Do not use car (starting) batteries such as those sold for automobiles.
WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batteries
to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cad-
mium batteries (nicads) or in other common battery types. Deep-cycle batteries are specifically designed to
provide power, drain down their charge and then accept a relatively quick recharge.
We work closely with our battery manufacturer to provide batteries that best suit your scooter's specific electrical
demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers. During shipping,
the batteries may encounter temperature extremes that can influence their initial performance. Heat diminishes
the charge on the battery; cold slows the available power and extends the time needed to recharge the battery.
It may take a few days for the temperature of the batteries to stabilise and adjust to their new room or ambient
temperature. More importantly, it takes a few charging cycles—partial draining followed by full recharging—to
establish the critical chemical balance that is essential to a deep-cycle battery's peak performance and long life.
Please follow these steps to properly break-in your new batteries for maximum efficiency and service life.
1. Fully charge any new battery prior to its initial use. This initial charging cycle brings the batteries up to
about 88% of their peak performance level.
2. Operate your scooter in familiar and safe areas. Drive slowly at first and do not travel too far from your
home or familiar surroundings until you have become accustomed to the controls and have properly
broken in the batteries.
3. Fully recharge the batteries. This recharge should bring the batteries up to about 90% of their peak
performance level.
4. Operate your scooter again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak
performance level and are able to last for an extended period of time.
How can I ensure maximum battery life?
Fully charged deep-cycle batteries provide reliable performance and extended battery service life. Keep the
batteries fully charged whenever possible. Batteries that are deeply discharged, infrequently charged or stored
without a full charge may be permanently damaged and cause unreliable performance and limited service life.
What about public transport?
If you intend to use public transport with your scooter, you must contact the transportation provider in
advance to determine their specific requirements.
Icon www.pridemobility.com
27