Table of Contents
Advertisement
WARNING: Always keep your face and body
as far away from the burner as possible
when lighting.
TO LIGHT THE SIDE BURNER
To light the side burner, remove any
cooking utensils from the burner grate.
Push and turn the control knob
counterclockwise to the "HI/Light" position.
If the burner does not light, turn the control
knob to "OFF". If the smell of gas is
detected and the igniter is not functioning,
immediately turn the control knob "OFF".
Allow 5 minutes for any accumulated gas
to dissipate. If the side burner igniter is not
functioning, see the following section for
match lighting.
TO MATCH LIGHT THE GRILL
If the burner will not light after several attempts
then the burner can be match lit.
Lighting rod-Here is your instruction:
Match light extension rod
Use this device to match light your burners
Simply place a lighted match between the coils
on the end of the extension rod and hold next
to the burner to ignite.
GRILL LIGHTING INSTRUCTIONS
If you've just attempted to light the burner
with the igniter, allow 5 minutes for any
accumulated gas to dissipate. Keep your
face and hands as far away from the grill
as possible. Insert a lit match attached to
tight lighting rod or lighter through the
cooking grids to the burner.(see next page)
Press the control knob and rotate left to the
HI/Light setting, continue to press the knob
until the burner ignites. Burner should light
immediately. If the burner does not light in
4 seconds turn the knob off, wait 5 minutes
and try again.
TO MATCH LIGHT THE SIDE BURNER
Hold a lit extended match or lighter near
the side burner ports, turn the control
knob counterclockwise to "HI/Light". Move
your hand immediately once the burner is
lit. Rotate the control knob to the desired
setting.
Keep a spray bottle of soapy water
near the gas supply valve and check
the connections before each use.
Do not attempt to light the grill if odor
of gas is present. Call for service
913-8999
1-800-
17
I15Y06N-1
Advertisement
Table of Contents
