Pride Ultimate 3 CF3001 Owner's Manual page 31

V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figure 17.
2. Position the toggle latch buckle over the top of the toggle latch. See figure 18.
3. Lower the tiller to the scooter floorboard.
TOGGLE
LATCH
Figure 17. Toggle Latch (Latched)
Frame Separation
1. Push back on the seat post to pivot the scooter's rear section rearwards until the rear section is standing
vertically on its rear bumper. See figure 19.
2. Lift the front section up until the lower pegs are no longer in the slots. See figure 20.
3. Carefully move the front section away from the rear section.
Figure 19. Frame Positioning
Ultimate
TOGGLE LATCH
RELEASE BUTTON
Figure 18. Toggle Latch (Unlatched)
Figure 20. Separating the Frame Sections
www.pridemobility.com
TOGGLE LATCH BUCKLE
31