Remote Control Unit; Power Button - Pioneer VSX-D607S Service Manual

VSX-D607S

Remote control unit

RECEIVER POWER TV POWER
1
POWER
2
ENTER
3
VOL
4
CHANNEL
5
MULTI CONTROL
DVD LD/SAT
6
VCR
TV CONTROL
PERSONAL
7
SURROUND
DSP MODE
CENTER
8
SUBWOOFER
FUNCTION
9
MULTI
OPERATION SYSTEM OFF
0
MULTI CONTROL COMMANDER
PRE-PROGRAMMED AND LEARNING
1 RECEIVER POWER button
2 MUTING button
Press to mute the volume.
3 [When set to SURROUND (OPERATIONS)]
%,fi,@,# (Select/Adjust) and ENTER buttons
[When set to other than SURROUND (OP-
ERATIONS)]
*(Pause), & (Stop), !(Rewind), ⁄(Fast Forward),
# (Play) buttons
4 VOL ( –, +) buttons
5 [TV Operations]
Selects the TV broadcast channel.
[CD, LD, DVD operations]
$, › (Chapter/Track Search) buttons
6 MULTI CONTROL function buttons
Use to set and operate MULTI CONTROL, and switch
the function.
TV CONTROL: Press to operate the TV.
66
-
=
FQ
FQ
–
VOL
CD
TUNER
ATT TEST TONE
REAR
EFFECT
DISC
CLASS TV/VCR
MODE CHECK
~
COMMANDER
SET UP
!
@
7 SURROUND/PERSONAL button
[When setting MULTI operations]
Press when setting the personal mode using multi
operations.
[When setting to other than MULTI opera-
tions]
Press when performing surround operations and
setting/changing setting modes.
8 Number/surround setting buttons
[When setting surround (operations)]
: Turns the Dolby Surround mode ON/OFF.
DSP MODE: Switches the surround effects.
ATT: If turned ON when the sound is unstable due to
excessive input levels, the input signal level drops so
that the sound becomes clearer.
TEST TONE: When turned ON (while in surround
mode), volume balance adjustment signals are out-
put in order from the speakers and can be adjusted.
CENTER –, +: Adjusts the center level.
REAR –, +: Adjusts the rear level.
SUB WOOFER –, +: Adjusts the sub woofer level.
EFFECT –, +: Adjusts DSP effects.
[Tuner Operations]
Number buttons: Use for setting the frequency value
when station call is selected or during direct access.
CLASS: Switches the CLASS number.
[VCR Operations]
TV/VCR: Switches between TV/VCR.
[CD Operations]
DISC: Use to select the DISC number.
9 FUNCTION button
Switches the function.
0 MULTI OPERATION button
Use to set multi operations.

- POWER button

Turns ON/OFF the power of devices other than this unit.
= TV buttons
~ MODE CHECK button
! COMMANDER SET UP button
Use to control and learn operations of other manufac-
turers' equipment, and set multi operation functions.
@ SYSTEM OFF button
Use to turn OFF the power of all equipment connected
to the main unit.