U.s.: Http://Support.toshiba.com Canada: Http://Support.toshiba.ca/Support/Ceg; Automatically Adjusting The Aspect Ratio; Using The 4:3 Stretch - Toshiba 40L310U Manual

40L310U Toshiba 40" 1080p 60Hz LED TV
4 Press or to move the picture up and down as
needed, then press ENTER. To save the new
settings, press
press ENTER.
OR
To revert to the factory defaults, highlight Reset
then press ENTER.
5 Press EXIT to close the menu.

Automatically adjusting the aspect ratio

When the Auto Aspect option is set to On, your TV
automatically selects the picture size when one of the
following input sources is received:
• 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE IN jack
• 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal
from an HDMI jack
Aspect Ratio of Signal
Source
4:3 Normal
4:3 Letter Box
16:9
Not defined (no ID-1
data or HDMI® aspect
data)
1 Press MENU, press
then press ENTER.

U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/

or to highlight Done, then
Auto Aspect is set to
On)
4:3
TheaterWide 2
Full
The current picture size
you selected, see
Adjusting the picture
size on page 47.
or to highlight Picture,
2 Highlight Display Settings, then press ENTER.
3 Highlight Auto Aspect, then press ENTER.
4 Highlight On, then press ENTER. (To turn off
Aspect Ratio, select Off.)
5 Press EXIT to close the menu.

Using the 4:3 Stretch

When 4:3 Stretch is turned on, your TV displays 4:3
programs as a full-screen picture.
1 Press MENU, press
then press ENTER.
or to highlight Picture,
49