Connecting A Dvd Or Blu-Ray Player; Hdmi (Best) - Toshiba 40L310U Manual

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a DVD or Blu-ray player using:

• HDMI (best)

• Component video (better)
• AV (composite video) (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the back of your TV and to the HDMI OUT jack
on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the Input Selection list.
5 Press or to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
20 U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
DVD or Blu-ray
player
What connection should I use?
HDMI cable
Back of TV
Toshiba 40" 1080p 60Hz LED TV
on page 13.