Dynamic Stability Control (Dsc) - Mazda mx-5 2007 Manual

Driving Your Mazda
Starting and Driving
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
In addition to the indicator light
l
flashing, a slight lugging sound will
come from the engine. This indicates
that the TCS is operating properly.
On slippery surfaces, such as fresh
l
snow, it will be impossible to
achieve high rpm when the TCS is
on.
í
5-24
Some models.
Dynamic Stability Control
í
(DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
Refer to ABS (page 5-7) and TCS (page
5-23).
WARNING
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident.