Remove the DIMM.
11.
To replace the component, reverse the removal procedure. To configure the memory mode, use HP UEFI
System Utilities (on page 58).
HP Smart Storage Battery
To remove the component:
Power down the server blade (on page 23).
1.
Remove the server blade (on page 24).
2.
Place the server blade on a flat, level work surface.
3.
Remove the access panel
4.
Remove the left DIMM baffle
5.
Remove the HP Smart Storage Battery.
6.
To replace the component, reverse the removal procedure.
("Access
panel" on page 26).
("DIMM
baffles" on page 35).
Removal and replacement procedures 38