Advanced Settings; Expert Settings - Muratec Office Bridge IF-200 Operating Instructions Manual

7. Advanced Settings

7.1. Expert Settings

Expert Settings allow you to change the detailed behavior of your IF-200.
It is strongly recommended that you do not change any of these settings
NOTE:
without guidance from the Diagnostic Center. They can be reached at 800-
347-3296.
To make a change, press SETUP from the Main screen. Scroll to Advanced Settings
and press EDIT. Then, scroll to Expert Settings and press EDIT. Use the scroll keys to
move to the field you want to change and press EDIT. Make the change and press
OK. Press ESC until you return to the Main screen.
Table 4. Expert Settings and Options
SETTING
Serial #
Ethernet Address
IF-200 Password
IF-200 Phone #
CSID
Host Baud Rate
(Not currently used)
Fax Baud Rate
OPTIONS AND DESCRIPTION (Default settings are in BOLD
type)
Your IF-200 serial number. (Cannot be changed.)
IF-200's IEEE MAC Address. (Cannot be changed)
Controls access to IF-200 system settings. Inactive unless entered.
"IF-200" is the current default. You may change this to the
telephone number of your fax machine.
BLANK Calling Station I.D.
4800
9600
19200
38400
57600
115200
The baud rate of the SERIAL port used to communicate with a PC
for remote configuration purposes in bits per second (bps).
Maximum
9600
7200
4800
2400
Appendix B
27