Checking The Limiter Action - Korg HAVIAN 30 User Manual

Hide thumbs Also See for HAVIAN 30:

Table of Contents

Limiter, Master EQ

Limiter Parameter

Checking the Limiter action

You can use the bargraph meters to check the level of the audio entering and

going out of the Limiter.

If the input level is too high, decrease the level of the Sounds, Styles and/or

Songs that are playing.

If the output level is too high, decrease the level of the

Look at the gain reduction indicator, to understand the amount of limiting

going on. Excessive limiting may dramatically change the quality of the musi-

cal program.

Sets the signal compression ratio. Compression

is applied only when the signal level exceeds the

Threshold value. 1.0:1 means no compression.

Sets the level above which compression is ap-

plied. 0dB means no signal processed.

Sets the attack time. A higher attack time will

cause the compres- sion to be applied more slow-

ly, and not react fast enough for notes with faster

Sets the release time. A higher release time will

cause the com- pression to be released more

slowly; this may help sustaining longer notes.

Sets the output gain. Use it to compensate for the

gain loss caused by compression.

Show Quick Links

Table of Contents