Setting The Drum Kit’s Basic Parameters; Selecting And Setting A Key; Choosing The Number Of Layers Per Key; Turning The Key On Or Off - Korg HAVIAN 30 User Manual

Setting the Drum Kit's basic parameters
When editing a Drum Kit, you first choose and set the percussive samples
assigned to each key and velocity layer.
▪
Go to the Sound > DrumKit > Sample Setup

Selecting and setting a key

The key can be selected and programmed in the
Choosing the key to edit
▪
Use the Key parameter to select a key. As an alternative, select it by pressing
a key on the keyboard.

Choosing the number of layers per key

Each key can have a variable number of velocity zones (layers). This allows
for assigning different samples to different playing velocity strengths.
▪
Use the Layers
the selected key. Depending on the number of selected layers, a different
number of velocity switches will become available.

Turning the key on or off

▪
Use the Assign
assigned, the next assigned key on the right will extend over it.
Setting the Drum Kit's basic parameters |343
pop-up menu to choose the number of layers assigned to
checkbox to turn the selected key on/off. When a key is not
page.
KEY section.