Fisher & Paykel E402B Installation Instructions And User Manual page 19

To reset filter indicator
Important!
We recommend the water filter is used from installation.
Do not reset monitor before filter is changed or filter monitoring will be inaccurate.
Press and hold and
If present the icon in the
To disable filter indicator
When no filter is to be fitted, you can disable the filter indicator.
Press and hold ,
When activated or deactivated the
screen.
We recommend that you do not disable the filter indicator if you have a filter fitted to the
connection.
Important!
To avoid serious illness or death, do not use the water filter where water is unsafe or of unknown
quality without adequate disinfection before or after use of filter.
The water filter cartridge needs to be changed when the filter indicator icon flashes on the
interface panel.
We recommend the water filter cartridge is replaced when the
every 6 months or 2800 L (740 gallons).
If the water filtration system has been allowed to freeze, replace filter cartridge.
If system has not been used for several months and water has an unpleasant taste or odour,
flush system by dispensing 3 L (3 qt) of water. If unpleasant taste or odour persists, change filter
cartridge.
buttons for 4 seconds.
screen will disappear.
and buttons for 4 seconds to turn this off/on.
icon will flash and on or off will be displayed in the
Water filter
icon flashes. This will happen
17
EN