Stanley Lismore Installation And Operating Instructions Manual page 6

The chimney and connecting flue must have a mini-
mum diameter of 150mm and at no point must the
diameter reduce to less than the size of the outlet
socket of the stove.
Any bend in the chimney or connecting fluepipe
should not exceed 45
used.
Max. Horizontal Run
o o
. 90 bends should not be
Fig.8
Combustible material should not be located where
the heat dissipating through the walls of fireplaces or
flues could ignite it. Therefore when installing the
stove in the presence of combustible materials due
account must be taken of the guidance on the sepa-
ration of combustible material given in Building
Regulations.
Fig.9
5