Lexus 2015 ct200h Quick Manual page 29

■
Adjusting the set speed
■
Changing the vehicle-to-vehicle distance
Preceding vehicle
mark
The vehicle-to-vehicle distance control mode maintains the preset cruising speed as long
as no vehicle is detected ahead.
■
Canceling and resuming the speed control
29
CT200h_QG_OM76210U_(U)
1 Increases the speed
2 Decreases the speed
Fine adjustment: Momentarily move
the lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
Pressing the button changes the vehicle-to-
vehicle distance as follows:
1 Long
2 Medium
3 Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
power switch is turned to ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will be also dis-
played.
1 Pulling the lever toward you cancels
the Dynamic radar cruise control.
The speed setting is also canceled
when the brakes are applied.
2 Pushing the lever up resumes the
Dynamic radar cruise control and
returns vehicle speed to the set speed.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).