1. Manuals
  2. Brands
  3. Echo Manuals
  4. Tiller
  5. BRD-280
  6. Operator's manual

Echo BRD-280 Operator's Manual

Bed redefiner
Hide thumbs Also See for BRD-280:
Table of Contents

Advertisement

Quick Links

Download this manual
x7722271404 / x772000164
Operator's Manual
The muffler or catalytic muffler and surrounding cover may become extremely hot.
Always keep clear of exhaust and muffler area, otherwise serious personal injury may
occur.
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Users of this equipment risk injury to themselves and others if the unit is used
improperly and/or safety precautions are not followed. ECHO provides an operator's
manual and a safety manual. Both must be read and understood for proper and safe
operation. Failure to do so could result in serious injury.
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time
of publication, but are subject to change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
X7502314001
© 04/2015 ECHO Inc.
BRD-280
Bed Redefiner
Burn Hazard

Advertisement

Table of Contents
loading

Related Manuals for Echo BRD-280

Summary of Contents for Echo BRD-280

  • Page 1 Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation.

  • Page 2: Table Of Contents

    The Safety Manual........................3 Servicing Information ......................... 3 Parts/Serial Number........................3 Service ............................3 Echo Consumer Product Support ....................3 Product Registration ........................3 Additional or Replacement Manuals .................... 4 Safety..............................4 Manual Safety Symbols and Important Information ..............4 International Symbols ........................

  • Page 3: Introduction

    Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required.

  • Page 4: Additional Or Replacement Manuals

    ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video. SAFETY Manual Safety Symbols and Important Information Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words.

  • Page 5: International Symbols

    Fuel and Oil Keep Bystanders and Helpers Hot Surface Mixture Away 15 m (50 ft.). AVOID KICKOUT. Thrown Direction of Keep Bystanders At Least Objects Blade 15 meters (50 feet) Away. Beware Thrown Objects Wear Eye Protection X7502314001 © 04/2015 ECHO Inc.

  • Page 6: Personal Condition And Safety Equipment

    Hearing/Ear Protection ECHO recommends wearing hearing protection whenever unit is used. Breathing Protection Operators who are sensitive to dust or other common airborne allergens may need to wear a dust mask to prevent inhaling these materials while operating unit.
  • Page 7 ECHO does not recommend the use of this machine by anyone who has a pacemaker.
  • Page 8 • Always hold throttle handle and support handle with thumbs and fingers tightly encircling the handles. Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. X7502314001 © 04/2015 ECHO Inc.

  • Page 9: Equipment

    Use only ECHO attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

  • Page 10: Emission Control (Exhaust & Evaporative)

    The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. X7502314001 © 04/2015 ECHO Inc.

  • Page 11: Description

    Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
  • Page 12 18. CHOKE - The choke control is located at the rear of the air cleaner housing. Move choke lever to COLD START ( ) to close choke for cold start. Move choke lever to RUN ( ) position to open choke. 19. SPARK PLUG - Provides spark to ignite fuel mixture. X7502314001 © 04/2015 ECHO Inc.

  • Page 13: Contents

    The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

  • Page 14: Assembly

    3. Install and center edger blade (C) on inner adapter. 4. Install outer adapter (D) and nut (E). 5. Tighten nut (E) firmly, counterclockwise. 6. Remove locking tool (B). 7. Install new split pin (F) to secure nut (E). X7502314001 © 04/2015 ECHO Inc.

  • Page 15: Operation

    Fuel Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement.
  • Page 16 Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Stored two-stroke fuel may separate. ALWAYS shake fuel container thoroughly before each use. X7502314001 © 04/2015 ECHO Inc.

  • Page 17: Starting Cold Engine

    5 pulls, repeat instructions 2 - 5. 6. Throttle Trigger After engine warm-up, grip throttle handle and support handle. Depress the throttle trigger lockout, and gradually depress throttle trigger to increase engine RPM to operating speed. X7502314001 © 04/2015 ECHO Inc.

  • Page 18: Starting Warm Engine

    Move stop switch button (A) backward to STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again. X7502314001 © 04/2015 ECHO Inc.

  • Page 19: Operation Techniques

    ONLY for redefining existing bed edges. For edging scan this QR code. next to curbs, sidewalks, or other hard surfaces, remove redefining blade and install ECHO Approved Premium Power Edger blade. Use of redefining blade next to hard surfaces, can lead to premature blade wear.

  • Page 20: Edging Operation

    Never adjust blade height or clear debris from shield with engine running, otherwise serious personal injury may result. Note: Blade depth may have to be adjusted due to differences in height between the hard surface and the top of the grass. X7502314001 © 04/2015 ECHO Inc.
  • Page 21 Use the blade location slot in the top of the debris shield as a guide to align the blade with the cut during edging. 8. Do not force the blade. Move only as quickly as the blade will allow. X7502314001 © 04/2015 ECHO Inc.

  • Page 22: Maintenance

    If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded.

  • Page 23: Air Filter

    5. Place foam pre-filter over raised center and inside outer lip of air filter. Install air filter in air filter case. 6. Install air filter retainer on post in air filter cover, flat side up. 7. Install air filter cover and tighten cover knob securely. X7502314001 © 04/2015 ECHO Inc.

  • Page 24: Fuel Filter

    2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage engine. 3. Adjust spark plug gap by bending outer electrode. 4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf). X7502314001 © 04/2015 ECHO Inc.

  • Page 25: Cooling System

    DO NOT use a metal scraper to remove dirt from the cylinder fins. 5. Use brush to remove dirt from the cylinder fins. 6. Remove grass and leaves from the grid between the recoil starter and fuel tank. 7. Assemble components in reverse order. X7502314001 © 04/2015 ECHO Inc.

  • Page 26: Exhaust System

    6. Tighten muffler mounting bolts (or nuts) to 60-80 kgf•cm (53-70 in•lbf). 7. Install muffler cover and attach spark plug lead. 8. Start engine, and warm to operating temperature. 9. Stop engine, and re-tighten mounting bolts (or nuts) to specifications. X7502314001 © 04/2015 ECHO Inc.

  • Page 27: Carburetor Adjustment

    This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

  • Page 28: Blade Replacement/Lubrication

    Note: Blade nut (D) is left hand thread. 4. Remove blade left hand threaded nut (D) in a clockwise direction using T-wrench. Remove outer fixing plate (E), blade (F) and inner fixing plate (B). 5. Clean all loose debris from gear box. X7502314001 © 04/2015 ECHO Inc.
  • Page 29 10. Install outer fixing plate (E) and nut (D). Tighten left hand threaded nut (D) firmly, counterclockwise. Note: Never reuse old split pin. 11. Install new split pin (A) to secure nut. X7502314001 © 04/2015 ECHO Inc.

  • Page 30: Troubleshooting

    Fuel strainer clogged Clean or replace Fuel at carburetor No fuel at carburetor Fuel line clogged Clean or replace Carburetor See your Echo dealer No fuel at cylinder Carburetor See your Echo dealer OPEN choke Fuel at cylinder Clean/replace air filter...

  • Page 31: Storage

    Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there. 8. Install the spark plug (do not connect ignition cable). X7502314001 © 04/2015 ECHO Inc.

  • Page 32: Specifications

    Spark Plug NGK BPM-8Y (Gap 0.65 mm (0.026 in.) Fuel Mixed (Gasoline and Two-stroke Oil) 50 : 1 Power Blend X or ECHO Red Armor ® ISO-L-EGD (ISO/CD 13738) and J.A.S.O. Fuel/Oil Ratio M345- FD, two-stroke, air-cooled engine oil. Use 89 Octane unleaded. Do not use fuel containing methyl alcohol, more than 10% Gasoline ethyl alcohol or 15% MTBE.

  • Page 33: Warranty Statements

    Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty. • ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s manual for string head installation and maintenance instructions.
  • Page 34 10% ethanol (grain alcohol) or 15% MTBE (methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual. engine speeds as listed in your operator’s manual.

  • Page 35: Product Registration

    Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.

  • Page 36: Notes

    NOTES BRD-280 NOTES X7502314001 © 04/2015 ECHO Inc.
  • Page 37 BRD-280 NOTES X7502314001 © 04/2015 ECHO Inc.
  • Page 38 NOTES BRD-280 X7502314001 © 04/2015 ECHO Inc.
  • Page 39 BRD-280 NOTES X7502314001 © 04/2015 ECHO Inc.
  • Page 40 ECHO, INCORPORATED T69914001001/T69914999999 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com...

Table of Contents