Relay Mode - Denon CDR-W1500 Operating Instructions Manual

8. Timer playback
• A separately sold audio timer can be used to start playback or recording at a specific time.
• Also refer to the operating instructions for the audio timer and amplifier.
• The program and relay modes can also be used.
(1) Connections
CDR-W1500 (this set)
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER
8 9 NORMAL DUBBING HIGH
PLAY STOP PAUSE
1 2
Amplifier
Audio timer
(2) Timer playback
(Main unit)
CDR-W1500
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER
DUBBING DISPLAY TITLE /
8 9 NORMAL HIGH TIME SELECT CHARACTER
REMOTE SENSOR
POWER PHONES PHONES LEVEL
PLAY STOP PAUSE

RELAY MODE

OPEN / CLOSE ON OFF
-
5
1 2 3
MIN MAX
5
1
Turn on the power of the CDR-W1500 and the connected components.
Perform the procedure at "Setup Method (10) Timer play mode setting" (Page 12) and make the timer playback on
2
setting.
3
Load the Disc for timer playback into the CDR-W1500.
4
Set the amplifier's input selector to "CD".
Press the play button ( PLAY).
1
5
• Play the disc to check the volume.
Set the audio timer for the desired time.
• The power of the components connected to the audio timer turns off.
6
• When the set time is reached, the power of the various components turns on automatically and playback begins from
track one.
• The settings for the program mode, random mode, relay mode, etc., are stored in the memory before the power is turned
off.
• If there is no disc in the CD side and a disc is loaded in the CD-R side:
Timer playback does not function when the relay mode is set to normal or dual.
Timer playback functions for the CD-R side when the relay mode is set to relay or mix.
CDR-W1500
TIME SELECT DISPLAY CHARACTER TITLE / TIME CLEAR INPUT FINALIZE 4 REC
8 9
REMOTE SENSOR
POWER PHONES PHONES LEVEL MULTI JOG
RELAY MODE OPEN / CLOSE ON OFF - + OPEN /CLOSE MENU PLAY STOP PAUSE
3 5 5 1 2 3
MIN MAX
ENTER PUSH
AC 230 V/50 Hz power outlet
(Remote control unit)
Select the deck to be operated.
_ DUBBING _
NORMAL HIGH
A ! " A ! " D # % D # %
1 2
＊
J J （ ） M M
4 5
S S . ／ V V : ;
7 8
[ = ] [ = ] { { ? }
10 + 10
TIME CLEAR INPUT FINALIZE 4 REC 8 9
REC
MULTI JOG
OPEN /CLOSE MENU PLAY STOP PAUSE
+ 6
MENU
5 1 2 3
PUSH
ENTER
8 ENTER
PLAY
STOP
2
PROG/DIRECT CALL
5
RANDOM TIME
14 RELAY MODE
Relay mode
Various types of playback and recording can be performed through relay operation between the set's CD and CD-R units.
There are three relay modes.
The set mode is stored in the memory, but the data may be cleared if the power is not turned on for 2 or 3 days.
• The mode switches as shown below each time the RELAY MODE button is pressed.
ª
• The disc in the CD unit and the one in the CD-R
Relay mode:
unit are played one after the other.
• Programmed play and random play of the disc in
ª
the CD unit and the one in the CD-R unit can be
Mix mode:
performed as if the two discs were a single disc.
ª
• The CD and CD-R units can be operated
Dual mode:
independently.
ª
Normal mode: • Either the CD or the CD-R unit can be operated.
NOTE:
• Recording, finalizing and editing are not possible in the relay or mix mode.
CD CD-R
RELAY
MODE
G & ' G & '
3
,
＋ P P −
6
Y Y ＜ ＞
9
CLEAR CLEAR
7
9
PAUSE
3 1
1 / ALL A - B
TITLE CHARACTER
ENGLISH
"Relay Play"
"Mix Play"
"Dual Play"
"Single Play"
23