Normal Playback - Denon CDR-W1500 Operating Instructions Manual

ENGLISH
4. Fade-in and fade-out recording
It is possible to record by gradually increasing the volume (fade-in) or decreasing it (fade-out).
(1) Fade-in recording
Also refer to "Setup Method (5) Fade-in time setting" (Page 11).
1
Perform the procedure at "Manual recording" step 1 to 8 (Page 15).
2
Start playing the selection you want to record on the CD player, cassette deck, etc.
Press the fader button on the remote control unit.
3
• "Fade In" is displayed, and "FADE" flashes during the fade in operation.
• The recorded sound is gradually increased from a recording level of – ∞ to the set recording level in the set time.
(2) Fade-out recording
Also refer to "Setup Method (6) Fade-out time setting" (Page 11).
During recording, press the fader button on the remote control unit.
1
• "Fade Out" is displayed, and "FADE" flashes during the fade out operation.
• The recorded sound is gradually decreased from the set recording level to a recording level of -– ∞ in the set time.
NOTE:
• The fade in/out recording function does not work in the synchro or copy recording modes. Record manually if you want to
use the fade in/out function.
18
12

NORMAL PLAYBACK

1. Starting playback
First try playing the tracks in order.
1
(Main unit)
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
DUBBING DISPLAY TITLE /
9 NORMAL HIGH TIME SELECT
8 CHARACTER
REMOTE SENSOR
POWER PHONES PHONES LEVEL MULTI JOG
ON OFF
PLAY STOP PAUSE RELAY MODE OPEN / CLOSE
-
1 2 3 5
MIN MAX
2 3 1
1
Load the disc to be played.
Press the PLAY button ( ) to start CD play.
1
• " "lights up and the track number and track time of the track in play appear on the display.
1
2
• Press the TIME button once, twice or three times to see:
Remaining track time, total remaining time, elapsed track time.
NOTE:
Disc" will be displayed at such times as when a disc is not loaded, the disc cannot be read properly due to
• "No
scratches or dirt, or the disc is loaded upside down.
2. Starting playback
Press the stop button ( STOP).
2
3
• Playback stops.
• The stop mode is set automatically once all the tracks on the disc have been played.
Select the deck to be operated.
(Remote control unit)
CD CD-R
_ DUBBING _
RELAY
1
NORMAL HIGH MODE
A ! " A ! " D # % D # %
1 2
J J （ ） M M ＊ ＋
4 5
. : ;
S S ／ V V
7 8
[ = ] [ = ] { ? }
10 + 10
TIME CLEAR INPUT FINALIZE 4 REC
8 9
REC
OPEN /CLOSE MENU PLAY STOP PAUSE
+ 6
MENU
5 1 2 3
PUSH
ENTER
8 ENTER
PLAY
STOP
3
2
PROG/DIRECT CALL 1 / ALL
1 2 3
RANDOM TIME TITLE CHARACTER
DISPLAY SEL. FADER INPUT
G & ' G & '
3
P P , −
6
Y Y ＜ ＞
9
CLEAR CLEAR
7
9
PAUSE
2
3
A - B
FINALIZE