Copying Procedure - Denon CDR-W1500 Operating Instructions Manual

ENGLISH
(9) Setting the Skip Play Mode
This allows playback that skips over tracks to which you do not want to listen.
(See "Registration of the tracks to which you do not wish to listen" on Page 28 for information on the setting of such tracks.)
(Main unit)
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
DUBBING DISPLAY TITLE /
9 NORMAL HIGH TIME SELECT
8 CHARACTER
REMOTE SENSOR
POWER PHONES
ON OFF
PLAY STOP PAUSE RELAY MODE OPEN / CLOSE
1 2 3 5
Set the unit to the setup mode, then turn the jog dial of the main unit or press the automatic search button of the
1
remote control to display "Skip Play?".
2
Press the enter button and set the skip play selection mode.
Turn the jog dial of the main unit or press the automatic search button of the remote control to select skip play on or off.
3
• The selected mode indication will flash. "On/Off"
Press the enter button and set the skip play to on or off.
4
• "S.Play On" or "S.Play Off" will be displayed.
NOTES:
• Finalizing the disc when tracks to which you do not want to listen have been registered, results in the skip play mode
automatically being switched on.
• Skip play is not possible on CD players that lack a skip play function.
• Program play and random play are not possible when there has been registration of tracks to which you do not want to
listen.
(10) Timer play mode setting
Timer playback is possible. (See Page 23.)
(Main unit)
CDR-W1500
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER
DUBBING DISPLAY TITLE /
8 9 NORMAL HIGH TIME SELECT CHARACTER
REMOTE SENSOR
POWER PHONES
PLAY STOP PAUSE RELAY MODE OPEN / CLOSE ON OFF
1 2 3 5
Set the unit to the setup mode, then turn the jog dial of the main unit or press the automatic search button of the
1
remote control to display "Timer Play?".
2
Press the enter button and set the timer play selection mode.
Turn the jog dial on the main unit or use the automatic search buttons on the remote control unit to turn the timer play
3
mode on or off.
• The selected mode indication will flash. "On/Off"
Press the enter button to set the timer play mode on or off.
4
• "TimerPlayOn" or "TimerPlayOff" will be displayed.
12
A ! "
(Remote control unit)
J J （ ）
4
.
S S ／
7
[ = ] [ = ]
10
TIME CLEAR INPUT FINALIZE 4 REC
8 9
PHONES LEVEL MULTI JOG
OPEN /CLOSE MENU PLAY STOP PAUSE
- + 6
5 1 2 3
MIN MAX
PUSH
ENTER
8
STOP
2
PROG/DIRECT CALL
1,2,3,4
RANDOM
DISPLAY SEL. FADER INPUT
A ! "
(Remote control unit)
J J （ ）
4
S S . ／
7
[ = ] [ = ]
10
TIME CLEAR INPUT FINALIZE 4 REC 8 9
PHONES LEVEL MULTI JOG
OPEN /CLOSE MENU PLAY STOP PAUSE
- + 6
5 1 2 3
MIN MAX
PUSH
ENTER
8
STOP
2
PROG/DIRECT CALL
1,2,3,4
RANDOM
DISPLAY SEL. FADER INPUT
10

COPYING PROCEDURE

About copying
D # % G & '
Copying can be performed easily from the set's CD unit onto the CD-R unit.
M M ＊ ＋ P P , − There are two copying speeds (normal and high) and four copying modes.
5 6
• The mode switches as described below each time the normal speed copying button (NORMAL) or the high speed copying
: ;
V V Y Y ＜ ＞
8 9
button (HIGH) is pressed.
{ ? } } CLEAR CLEAR
+ 10
ª
REC
Disc dubbing: In this mode, entire CDs can be copied onto CD-R/RW.
7
MENU
2,4
("All Tr Dubb" is displayed.)
ENTER 9
PLAY
PAUSE
1,3
3
ª
1 / ALL A - B
Make CD: In this mode, entire CDs can be copied onto CD-R/RW then finalized automatically.
TIME TITLE CHARACTER ("Make CD Dubb" is displayed.)
FINALIZE
ª
1TR dubbing: In this mode, single tracks on CDs can be copied.
("1Tr Dubbing" is displayed.)
ª
Scan REC dubbing: In this mode, the desired tracks can be selected from CDs and copied.
("Scan Rec Dub" is displayed.)
• The recording level is automatically set to the default value (0.0 dB).
• The repeat and random play modes are canceled when the copy mode is set.
• During normal speed copying you can listen to the sound as you copy.
• During high speed copying no sound is produced.
• No signals are output from the digital outputs during high speed copying.
• During copying, buttons other than the CD or CD-R stop buttons do not function.
• When CD TEXT compatible CDs are copied, the disc names and track names are also copied.
When copying, switch the relay mode to the normal or dual mode. Copying is not possible in the relay or mix mode.
For optimum recording, make sure there are no fingerprints, scratches or dust on the signal surface of the source side CD or
the CD-R/RW.
The auto track function is always activated in the copying mode. It is not possible to assign track numbers manually.
NOTES:
• Copying is normally performed with digital signals, but if digital copying is not possible due to SCMS restrictions, copying
D # % G & '
is performed with analog signals. In addition, copying is always performed at normal speed. (See Page 5.)
,
M M ＊ ＋ P P −
5 6 • Analog signal copying is always performed in the normal speed mode.
V V : ; Y Y ＜ ＞
• If when the copying mode is set the recordable time on the CD-R/RW is shorter than the time of the CD source you are
8 9
trying to copy, "CD-R Short" is displayed and both the CD and CD-R units are set to the stop mode. If this happens,
{ ? } } CLEAR CLEAR
+ 10
check the disc's recordable time. (However, when recording track numbers 21 or higher from a source CD containing
REC
over 20 tracks, "CD-R Short" is not displayed even if the source time you want to record is shorter than the CD-
7
MENU
2,4
R/RW's recordable time.)
ENTER 9
• If the disc name has already been input on the disc on which you are recording, only the track names are copied.
PLAY
PAUSE
• For some CDs, the text cannot be copied because of copyright protection. In this case "Text
3 1,3
1 / ALL A - B
displayed.
TIME TITLE CHARACTER • Do not turn off the power or unplug the power cord while "Now PMA Rec" is displayed after recording is completed.
FINALIZE Doing so may render the disc unusable.
Protect" is