Cub Cadet CCR400 Instruction Manual page 20

CUTTING METHODS
WARNING:
when cutting around hard objects such
as rock, gravel, fence posts etc. that
can be contacted by the line or the
bump head (Fig. 5). Contacting these
items with the line or bump head may
cause pieces of the trimmer line and
debris to be violently thrown. It may
also cause the line to become
entangled and damage both the line
and the bump head.
When trimming, do not feed the line into
the work area too quickly and crowd the
line. Only the tip of the line does the
cutting (Fig. 6). Feeding the line into the
work area too quickly will reduce the
head speed, slow the cutting action and
overload the motor. It will also reduce
the Power Cell capacity before requiring
recharging.
NOTE: The trimming line will easily
remove grass and weeds from around
walls, fences, trees and flower beds, but
it can also cut the tender bark of trees
or shrubs, scar fences, etc. Be
extremely careful when trimming near
objects that can be easily damaged by
the trimmer line.
ASSEMBLY AND OPERATING
Be extremely careful
20
Fig. 5
Fig. 6