Test Equipment Depot - 800.517.8431 - Amprobe 5XP-A User Manual

Overload protection: 1000 V dc or 750 V ac
Accessories: One pair test leads TL245, 9 V battery
(installed),holster, magnet strap, Users Manual, Type K Bead
Thermocouple (35XP-A only), and temperature adaptor
(35XP-A only).
Altitude: 6561.7 Feet (2000 m)
P 
Safety: Conforms to EN61010-1, Rev-2; CAT I 1000V, CAT II
600V, CAT III 300V(5XP-A,35XP-A), CAT II 1000 V, CAT III 600
V(15XP-B), class 2 and pollution deg. 2; CSA 22.2 -1010-1.
EMC: Conforms to EN61326-1. This product complies with
requirements of the following European Community
Directives: 89/ 336/ EEC (Electromagnetic Compatibility) and
73/ 23/ EEC (Low Voltage) as amended by
93/ 68/EEC(CE Marking). However, electrical noise or intense
electromagnetic fields in the vicinity of the equipment may
disturb the measurement circuit. Measuring instruments
will also respond to unwanted signals that may be present
within the measurement circuit. Users should exercise care
and take appropriate precautions to avoid misleading results
when making measurements in the presence of electronic
interference.
Non-Contact Voltage Indicator
Sense voltage 70 V to 600 VAC (50 Hz to 60 Hz) beeper chirps
and bright red LED comes on, works when meter dial is on
any range.
Detection Distance
115 V 60 Hz
230 V 50 Hz
Replacement Parts
TL36 Test Lead Set w/threaded alligator clips
TL245 Replacement Test Leads
FP200 Fuse – 2 A / 1000 V (15XP-B and 35XP-A)

Test Equipment Depot - 800.517.8431 -

99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
22 mm (1 in)
75 mm (3 in)