Mitsubishi Electric FR-A8AX Instruction Manual page 15

800 series

Hide thumbs Also See for FR-A8AX:

Table of Contents

NOTE

• When using stranded wires without a blade terminal, twist enough to avoid short circuit with a nearby terminals or

wires.

• Pulling out the wire forcefully without pushing the open/close button all the way down may damage the terminal block.

• Use a small flathead screwdriver (tip thickness: 0.4 mm/tip width: 2.5 mm). If a flathead screwdriver with a narrow tip

is used, terminal block may be damaged.

Commercially available product (as of February 2012. The product may be changed without notice.)

Name

Model

SZF 0- 0,4  2,5

Driver

• Place the flathead screwdriver vertical to the open/close button. In case the blade tip slips, it may cause an inverter

damage or injury.

• When wiring cables to the inverter's RS-485 terminals while a plug-in option is mounted, take caution not to let the

cables touch the circuit board of the option or of the inverter. Otherwise, electromagnetic noises may cause

malfunctions.

Manufacturer

Phoenix Contact Co., Ltd.

INSTALLATION

Table of Contents