Multitech CommPlete MT3334HD8 User Manual page 83

Command
>DTn
En
&En
$En
$EBn
CommPlete Communications Server
Values Description
n = 0 or 1 DTMF Detection
*** >DT0 Disable DTMF detection.
>DT1 Enable DTMF detection when off-hook.
n = 0 or 1 Echo Command Mode Characters
E0 Do not echo command mode characters.
*** E1 Do echo command mode characters.
n = 0–15 V.42 Error Correction Modes
&E0 Non-error correction mode (V.42 disabled).
*** &E1 Auto-reliable mode.
&E2 Reliable mode (V.42 enabled).
Modem-Initiated Flow Control
&E3 Flow control disabled.
*** &E4 Hardware flow control.
&E5 XON/XOFF flow control.
XON/XOFF Pass-Through (&E5 selected)
*** &E6 XON/XOFF not passed through.
&E7 XON/XOFF passed through.
Hewlett-Packard ENQ/ACK Pacing
*** &E8 ENQ/ACK pacing off.
&E9 ENQ/ACK pacing on.
Non-Error Correction Mode Flow Control
*** &E10 Non-error correction mode flow control off.
&E11 Non-error correction mode flow control on.
Pacing (Computer-Initiated Flow Control)
&E12 Pacing off.
*** &E13 Pacing on.
Data Compression
&E14 Data compression disabled.
*** &E15 Data compression enabled.
n = 0 or 1 V.42 Error Correction at 300 bps
*** $E0 V.42 error correction at 300 bps disabled.
$E1 V.42 error correction at 300 bps enabled.
n = 0 or 1 Asynchronous Word Length
*** $EB0 10-bit mode enabled.
$EB1 11-bit mode enabled.
E AT Command Summary
77