Table of Contents
Advertisement
Sidemarker Lamps with Sealed Beam and
Composite Headlamps
2.
3. Pull the bulb ,straight out
of the socket.
. Remove the screws and
pull out the parkinghrn
signal lamp assembly.
4. Put a new bulb into the socket and push it in until it
is tight.
Reach through the opening and turn the sidemarker
bulb socket to the left and remove it.
5 . Put the socket back into the sidemarker assembly
and turn it to the right to tighten it.
6. Replace the parkingkurn signal lamp assembly and
tighten the screws.
6-40
Advertisement
Table of Contents
