Multitech CommPlete MR9600 User Manual page 64

MR9600 User Guide
12: 000 000 000 000 000 000 000 000
[5] A:\# setpollingon 5a
[6] A:\# bpstatus
Backplane Status:
-:no polling 0:count of 0
Slot A
5:
6:
7:
8:
9:
10: 000 000 000 000 000 000 000 000
11: 000 000 000 000 000 000 000 000
12: 000 000 000 000 000 000 000 000
[7] A:\ #
setreadcommunity
Parameter: None
Description: Changes the Read community settings.
Security: Supervisor
Example:
[0] A:\ # setreadcommunity public
Read Community public stored
[1] A:\ #
setsendtrap
Parameter: On, off
Description: Configures the MR9600 controller whether or not to send traps to an SNMP manager or
MultiCommManager console.
Security: Supervisor
Example:
[0] A:\ # getsendtrap
The sending of traps is enabled.
[1] A:\ # setsendtrap off
The sending of traps has been successfully disabled.
[2] A:\ # getsendtrap
The sending of traps is disabled.
setsubnet
Parameter: IP Address Mask
Description: Changes the subnet mask to the mask specified in the parameter. See se.
Security: Supervisor
Example:
[0] A:\ # setsubnet 255.255.255.0
Subnet mask 255.255.255.0 stored
[1] A:\ #
56
B C D E F G
000 000
000 000 000 000 000 000 000 000
000 000 000 000 000 000 000 000
000 000 000 000 000 000 000 000
000 000
Busy:NoResp:NoAck
1-9: tens digit plus 1
H I J K L M N
*:>=ninety
O P
CommPlete Communications Server