Commands Listed By Function - Multitech CommPlete MR9600 User Manual

Commands Listed by Function

This section lists the MR9600's commands alphabetically by the following functions: Display,
Environment, File, Modem Control, and Security.
For an expanded description of each command, see "Command Reference" on page 30.
Display
Command Name
getcalls
getfaults
getmodems
getpowerstatus, getps None
getrack
getslots
gettemp
Environment
Command Name
bpstatus
cl, clock
date
getgateway
getip
Getprichannels
getreadcommunity
getsendtrap
getsubnet
gettrap
getwritecommunity
more
priocbchannel
priosbchannel
pristatus
prisetup
CommPlete Communications Server
Parameter Description
Device Displays call traffic for the device
Device Displays faults for the device
Device Displays the current status for the device
Displays the main power supply/supplies status and
which segments are powered up
Device Displays the chassis type
None Displays hardware type and location in rack
None Displays the internal ambient temperature of the rack
in degrees Fahrenheit and Celsius.
Parameters Description
None Displays the rack's back plane polling activity
between the controller and each powered device
None Displays current date and time
None Prompts you for current date
None Display the configured gateway address
None Display the configured IP address
Device Retrieve the current status of each B-channel and
modem channel under the control of the PRI card.
None Displays the Read community settings
None Displays whether traps are being sent or not.
None Display the configured subnet mask
None Display the configured trap address
None Displays the Write community settings
Pathname Displays the contents of a file, one page at a time
Device Set the specified channel in service
Device Set the specified channel out of service
Specifier Retrieve the current status of the specified PRI card
Specifier Set configuration parameters for a PRI card.
5 Commands
23