Appendix G - Result Code Summary - Multitech BL-Series User Manual

Appendix G - Result Code Summary

TERSE (Digit)
0
1
2
3
4
5
6
7
8
9
11
12
13
19**
21**
23
24*
26*
28*
31*
33*
* 2834 Series only
** 1932 and 2834 Series only
VERBOSE (Words)
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT 1200
NO DIAL TONE
BUSY
NO ANSWER
CONNECT 2400
CONNECT 4800
CONNECT 9600
CONNECT 14400
CONNECT 19200
CONNECT 21600
CONNECT 1275
CONNECT 24000
CONNECT 26400
CONNECT 28800
CONNECT 31200
CONNECT 33600
Appendix G - Result Code Summary
Effect
Command was executed without error; ready for
next command.
Modem has detected carrier and gone on-line.
Modem has detected ring caused by incoming call.
No carrier signal has been detected within allowed
time.
Error in Command line (too many, or invalid
characters).
Modem has detected carrier at 1200 bps and gone
on-line.
No dial tone has been detected.
A busy signal has been detected.
Remote system did not answer.
Modem has detected carrier at 2400 bps and gone
on-line.
Modem has detected carrier at 4800 bps and gone
on-line.
Modem has detected carrier at 9600 bps and gone
on-line.
Modem has detected carrier at 14400 bps and gone
on-line.
Modem has detected carrier at 19200 bps and gone
on-line.
Modem has detected carrier at 21600 bps and gone
on-line.
Modem is connected in V.23 mode.
Modem has detected carrier at 24000 bps and gone
on-line.
Modem has detected carrier at 26400 bps and gone
on-line.
Modem has detected carrier at 28800 bps and gone
on-line.
Modem has detected carrier at 31200 bps and
gone on-line.
Modem has detected carrier at 33600 bps and
gone on-line.
145