Multitech FaxFinder V.34 Fax Servers FF Model Series User Manual page 31

5. At the application program (for example, a word processing program or drawing program), print to the
FaxFinder.
Setting the destination of the printing job varies from program to program. For the common Notepad
text editor program, for example, you must set the destination printer in the Page Setup screen. In
most cases, however, the destination printer can be set in a Print menu that appears when each
printing job is initiated.
Leave Properties/Preferences at Default
target printer, a 'Properties/Preferences' screen can be accessed by clicking on either "Properties"
or "Preferences" on the Print dialog box (for most application programs, it's a "Properties" button; for
a few, it's a "Preferences" button). However, we strongly advise you not to change any
parameters on the Device Settings tab or the Profile Manager tab of that screen. If you have
changed any parameters, click on the "Restore defaults" button to reset the parameters.
Multi-Tech Systems, Inc.
Chapter 3: FaxFinder Client Software Operation
Settings. After the FaxFinder has been chosen as the
FaxFinder Client User Guide
31