Olympus Camedia C-720 Ultra Zoom Basic Manual page 240

l
Do not point the viewfinder toward strong light, like the sun. This may damage the inside
of the viewfinder.
l
Do not push the momtor forcibly; otherwise the image may become vague, resulting in a
Display mode failure or damage to the monitor.
l
A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
l
When a subject is viewed diagonally in the camera, the edges may appear zigzagged on
the monitor. This is not a malfunction; It will be less noticeable in Display mode.
l
In places subject to low temperatures, the backlight may take a long time to turn on or its
color may change temporarily. When using the camera in extremely cold places, it is a
good idea to occasionally place it in a warm place. A backlight exhibiting poor
performance due to low temperatures will recover in normal temperatures.
l
The backlight built into the monitor and control panel has a limited service life. When the
monitor gets dark or flickers, consult your nearest Olympus dealer (Repairs will not be
free after the warranty expires).
l
The LCD used for the viewfinder or the monitor is made with high-precision technology.
However, black spots or bright spots of light may appear constantly on the LCD Monitor.
Due to its characteristics or the angle at which you are viewing the monitor, the spot may
not be uniform in color and brightness. This is not a malfunction.