Olympus Camedia C-720 Ultra Zoom Basic Manual page 172

POSSIBLE CAUSES
Pictures you have already taken do not appear on the monitor.
1 The camera is in the
shooting mode.
2 There is no picture on
the card.
3 There is a problem with
the card.
4 The camera is
connected to a TV.
5 The monitor is not on.
1 The diopter is not
adjusted properly.
2 The brightness is not
adjusted properly.
1 The brightness is not
adjusted properly.
2 The monitor is exposed
to direct sunlight.
Picture rotate, Picture protect, Single-frame erase, All-frame erase,
Print reserve and Card formatting cannot be performed.
1 A write-protect
adhesive seal is affixed
to the card.
CORRECTIVE ACTION
1 Set the mode dial to
2 NO PICTURE appears on the
monitor. Record pictures.
3 See the error code chart.
4 The monitor does not
function when the camera is
connected to a TV.
5 Press
monitor.
The viewfinder display is not clear.
1 Adjust the diopter again.
2 Adjust the brightness.
The monitor is not clear.
1 Adjust the brightness.
2 Block the sunlight or move
out of the sunlight.
1 Use the card after peeling
off the seal. Do not reuse
the write protect seal.
Troubleshooting (Cont.)
.
to turn on the
REF. PAGE
P. 34, 35
P. 32, 33,
133
P. 132
P. 103
P. 87
P. 31
P. 114
P. 114
–
P. 25
127