Honda TRX420TM1 Owner's Manual page 228

14 TRX420TM1 FM1 FM2-32HR36000.book 220 ページ ２０１３年８月２７日 火曜日 午後７時３７分
If You Have a Flat Tyre
Emergency Wheel Removal/Installation
Refer to Safety Precautions on page 113.
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Loosen – but do not remove – the wheel nuts (1).
3. Raise the front (or rear) wheels off the ground and place a
support block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the front brake disc or pad
surfaces when removing and installing each wheel. Any
contamination can cause poor brake performance or rapid pad
wear after reassembly.
220
Taking Care of the Unexpected
(2)
(1)
(2) wheel rim
(1)