14 TRX420TM1 FM1 FM2-32HR36000.book 181 ページ 2013年8月27日 火曜日 午後7時37分
Draining Water from Brakes
Refer to Safety Precautions on page 113.
RIGHT REAR
(1)
(1) rear brake drain bolt
1. Make sure the engine is OFF and the parking brake is set.
2. Remove the rear brake drain bolt (1) and sealing washer from the
bottom of the rear brake panel.
If any water drains, the brake seals must be replaced by your
dealer as soon as possible.
3. Install the rear brake drain bolt with a new sealing washer and
tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
Brakes
Servicing Your Honda
181