Razor RipStik Electric Owner's Manual page 6

ASSEMBLY AND SET -UP
Pairing the Remote – Cont'd
3
Using a small object, gently tap
the center of the pairing button.
The light on the power button
should now be flashing quickly.
6
If the light on the product
continues to flash quickly, turn
power switch on the remote to the
OFF position and repeat steps 3-4
until remote is paired.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
4
Move the lever on the remote
to the "STOP" position and HOLD.
Do not let go of the lever. Turn the
power switch on the remote to the
ON position.
5
If the light on the power
button on the product is solid,
your remote has been
successfully paired.
5
Note: Contact Customer Service
if you experience any issues with
pairing the remote.