Selectable Functions - Enabling And Disabling Procedures - Cobra SPYBALL 6808-9 User Instructions

14. SELECTABLE FUNCTIONS – ENABLING AND DISABLING PROCEDURES
The functions listed below are selectable, that is they can be enabled or disabled as chosen by the user. The
set-up is stored until the next time a different configuration is selected.
Biker Recognition (see paragraph 3)
-
On/off audible signals (see paragraph 4) and panic function (see paragraph 9)
-
"Turn indicator on" audible warning signal (see paragraph 13)
-
- Anti-hijack function (see paragraph 10)
Polarity of instantaneous alarm trigger input (this selection shall be operated by the installer and shall not
-
be altered by the user after the security system has been fitted).
Procedure:
While the security system is disarmed, turn ignition on, press and hold down push-button n. 1 of the transmitter
about 7 seconds, until the LED lights up, then release.  The LED remains on about 3 seconds.  During
this lapse of time, press push-button n. 1 again.  A short sharp audible signal confirms the procedure has
been entered. The LED switches off shortly, then it provides five different visual indications that relate to the
five selectable functions. Please refer to the chart below:
VISUAL SELECTABLE FUNCTION
INDICATION
1 flash Biker Recognition
2 flashes Arming and disarming audible
signals + panic function
___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9
TO SELECT
CONFIRMATION SIGNAL
Press push-button n. 1 of the
transmitter after the first flash
Three (3) sharp
signals follow
Press push-button n. 1 of the
transmitter after the second
TO DESELECT
CONFIRMATION SIGNAL
Press push-button n. 2 of the
transmitter after the first flash
audible One (1) sharp audible signal
follows
Press push-button n. 2 of the
transmitter after the second
34