Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Speaker Imp.) - Yamaha RX-A1010 Owner's Manual

Configuring the system settings
(ADVANCED SETUP menu)
You can configure the system settings of this unit using the front display.
1
Set this unit to standby mode.
2
While holding down STRAIGHT on the font panel, press MAIN ZONE
MAIN ZONE STRAIGHT
PROGRAM
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE to set this unit to standby mode and turn it on
again.
The new settings become effective.

ADVANCED SETUP menu items

Item Function
SPEAKER IMP. Changes the speaker impedance setting.
Turns on/off of the remote control sensor on the main
REMOTE SENSOR
unit.
REMOTE CON AMP Selects the remote control ID of the main unit.
.
Resets the Parental Lock code number for SIRIUS
SIRIUS LOCK
Satellite Radio.
TV FORMAT Switches the video signal type.
MONITOR CHECK Removes the limitation on HDMI video output.
Creates backup of the settings of this unit, or recovers
RECOV./BACKUP
the settings from the backup.
INITIALIZE Restores the default settings.
FIRM UPDATE Updates the firmware.
Checks the version of firmware currently installed on
VERSION
this unit.

Changing the speaker impedance setting (SPEAKER IMP.)

SP IMP. - SPEAKER IMP.
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
8 MIN
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
Select this when you connect 6-ohm speakers to this unit. You can also
6 Ω MIN
use 4-ohm speakers as the front speakers.
8 Ω MIN (default)
Select this when you connect 8-ohm or higher speakers to this unit.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
Page
118
119
119
119
119
119
120
120
120
120
118
En