Pioneer DEH-P9450MP Installation Manual page 4

Connection diagram for standard mode
2. Antenna jack
23 cm
15 cm
1. DSP switch
Switch the DSP switch
3. This Product 15 cm
as illustration below.
19. Blue/white
4. IP-BUS input (Blue)
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300 mA
15 cm
12 V DC).
5. Multi-CD player
(sold separately)
6. IP-BUS cable
10. Yellow/black
If you use a cellular telephone,
connect it via the Audio Mute
lead on the cellular telephone. If
not, keep the Audio Mute lead
free of any connections.
11. Yellow
12. Fuse holder
To terminal always supplied with
power regardless of ignition
switch position.
13. Red
14. Fuse resistor
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
15. Orange/white
14. Fuse resistor
To lighting switch terminal.
16. Black (ground)
To vehicle (metal) body.
34. With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
17. Connecting cords with RCA
pin plugs (sold separately)
7. Subwoofer output
(LOW/SUBWOOFER OUTPUT)
8. Rear output
(MID/REAR OUTPUT)
9. Front output
18. Power amp
(HIGH/FRONT OUTPUT)
20. System remote control
+ +
21. Front speaker 21. Front speaker
≠ ≠
22. White 24. Gray
+ +
21. Front speaker 21. Front speaker
≠ ≠
23. White/black 25. Gray/black
26. Left
29. Green 31. Violet
+ +
28. Rear speaker 28. Rear speaker
≠ ≠
30. Green/black 32. Violet/black
+ +
28. Rear speaker 28. Rear speaker
≠ ≠
+ +
33. Subwoofer 33. Subwoofer
≠ ≠
35. Perform these connections when using
a different amp (sold separately).
Connection diagram for 3-way network mode
18. Power amp
(sold separately)
1. DSP switch
Switch the DSP switch
18. Power amp
as illustration below.
(sold separately)
(sold separately)
10. Yellow/black
If you use a cellular telephone,
connect it via the Audio Mute
lead on the cellular telephone. If
not, keep the Audio Mute lead
free of any connections.
11. Yellow
To terminal always supplied with
power regardless of ignition
switch position.
27. Right
13. Red
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
15. Orange/white
To lighting switch terminal.
16. Black (ground)
To vehicle (metal) body.
Fig. 14
±¥ qJAë
2. Antenna jack
23 cm
36. Low range output
(LOW/SUBWOOFER OUTPUT)
15 cm
37. Middle range output
(MID/REAR OUTPUT)
3. This Product 15 cm
38. High range output
(HIGH/FRONT OUTPUT)
19. Blue/white
4. IP-BUS input (Blue)
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300 mA
15 cm
12 V DC).
5. Multi-CD player
(sold separately)
6. IP-BUS cable
+
39. High range speaker
≠
12. Fuse holder
+
39. High range speaker
≠
23. White/black
26. Left
14. Fuse resistor
+
40. Middle range speaker
≠
30. Green/black
14. Fuse resistor
+
40. Middle range speaker
≠
34. With a 2 speaker system, do not
connect anything to the speaker leads
+
that are not connected to speakers.
41. Low range speaker
≠
42. External amp is required for
connecting the low range speaker.
17. Connecting cords with RCA
pin plugs (sold separately)
18. Power amp
(sold separately)
18. Power amp
(sold separately)
18. Power amp
(sold separately)
20. System remote control
+
39. High range speaker
≠
22. White 24. Gray
+
39. High range speaker
≠
25. Gray/black
27. Right
29. Green 31. Violet
+
40. Middle range speaker
≠
32. Violet/black
+
40. Middle range speaker
≠
+
41. Low range speaker
≠
Fig. 15
35. Perform these connections when using
a different amp (sold separately).
±µ qJAë