Remove One-Way Clutch; Remove Output Shaft - Toyota A442F Repair Manual

AUTOMATIC TRANSMISSION - FRONT AND REAR PLANETARY GEAR UNIT
3. CHECK OPERATION OF O N E - W A Y CLUTCH
Hold the one —way clutch outer race and turn the
front planetary gear. The front planetary gear should
turn freely counterclockwise and should lock clock-
wise.
If operation is not as specified, replace the one —way
clutch.
4.

REMOVE ONE-WAY CLUTCH

Remove the one —way clutch from the front planetary
gear.
5.

REMOVE OUTPUT SHAFT

(a) Using a screwdriver, remove the snap ring.
(b) Remove the output shaft from the rear planetary gear.
(c) Remove the thrust bearing and race from the rear side
of the ring gear flange.
AT-71