Mazda 5 2007 Manual page 267

The quality designation SM, or ILSAC
must be on the label.
–30 –10
–20
0
–20
20
0
5W-20
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
5. Pull it out again and examine the level.
It's OK between MIN and MAX.
But if it's near or below MIN, add
enough oil to bring the level to MAX.
10 30
20 40
80
40 60 100 120
Full
OK
Low
Don't add engine oil over MAX. This
may cause engine damage.
50
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
The distance between MIN and MAX on
the dipstick represents the following:
L (US qt, Imp qt)
Maintenance and Care
Owner Maintenance
CAUTION
Oil capacity
0.75 (0.79, 0.66)
8-19